Dynatec

The FOUNDRY-MASTER COMPACT is ideal and cost effective for analytical application, where good repeatability is required, but very low levels of detection are not required.

The FOUNDRY-MASTER COMPACT abandons vacuum systems which are not required for non-ferrous materials. Additionally the instrument does not require any complicated gas flushing for its high-resolution Multi-CCD Optic, making it inexpensive to run.The pure simplicity of the FM compact is its 'air' flushed optic which provides measurement capability at wavelengths above 185 μm - 590 μm.

As with the standard FOUNDRY-MASTER COMPACT, large sample geometries can be placed on the open spark stand and can be analysed trouble free. Small objects, curved items, tube and wire samples can all be analysed, because the instrument has the unique WAS Jet-Stream Technology. Irregular samples can be measured with a single universal adapter.

The FOUNDRY-MASTER COMPACT is capable to measure Al, Cu, Mg, Zn alloy.

PMI MASTER PRO

PMI-MASTER PRO is mobile, fast and reliable metal analyzer which is widely used in metal, petrochemical, petroleum, automotive and positive material identification market. Apart from the new excitation-electronics, which guarantee a superior precision and constancy in both Arc and Spark results, the energy management of the instrument was also enhanced for mobile use. The 24 volt power supply is designed to guarantee independence from mains power over a number of days.

Operation is via a 12.1 inch touch-screen monitor. Thanks to the multi CCDs Optical-system with up to 30,000 channels, material tests on all standard material grades and chemical elements can be executed. With the optional UV probe assessing P and S in Steel is unproblematic. The PMI-MASTER PRO is capable to measure Fe, Al, Cu, Ti, Co, Ni, Zn, Mg alloy.

TEST MASTER PRO

TEST-MASTER PRO is a robust, mobile spectrometer for precise analysis, quick grade ID and sorting of metallic samples. It is optimised for continuous operation, and is ideally suited for heavy industrial and fully automated applications. The TEST- MASTER PRO exhibits the unique capability to produce precise carbon analysis with a surprisingly short 4 second test. Frequencies and voltages up 500 Hz / 500 V as well as an arc current of up to 6 amps allow the trouble-free excitation.

Speed of analysis, precision and user-friendliness were the most important factors in the development of the TEST-MASTER PRO. The Test- Master Pro is capable to measure Fe, Al, Cu, Ti, Co, alloy.

ARCMET-8000

Oxford Instruments understands the increasing importance of the need to analyze key elements in metals. Performance and precision has to be second to none. That is why ARCMET 8000 has been designed to identify all the key elements in metals, including carbon and other light elements. ARCMET 8000 has the unique capability of measuring carbon in both air and argon modes.

ARCMET probe is the heart of the system - unique to ARCMET 8000, All the analysis takes place in the probe, not metres away in the main unit - this gives optimum accuracy, as the signal is not weakened. The only probe to have an integral display - so if you are measuring remotely or high up, you don't have to return to the main unit to see your results. The ARCMET 8000 is capable to measure Fe, Al, Cu, Ti, Co, Ni, Zn, Mg alloy.